Worst John Deere 755 Problems Explained: Quick Fixes and Solutions

The worst John Deere 755 problems often include hydraulic system failures, engine overheating, transmission issues, PTO malfunctions, electrical problems, steering difficulties, fuel system issues, and brake troubles. Quick solutions involve checking and topping off fluids, cleaning filters, bleeding air from systems, and replacing worn parts like filters and seals. For major issues, a certified John Deere mechanic is recommended. Regular maintenance can prevent many of these problems and keep the tractor performing reliably.

This guide will help you navigate the most common John Deere 755 issues and provide actionable steps to fix them quickly. Let’s dive in.


1. Hydraulic System Failures

Common Symptoms

Hydraulic problems are a significant issue with the John Deere 755. Typical symptoms include:

  • Loss of hydraulic power
  • Slow or jerky response from attachments
  • Unusual noises from the hydraulic pump

Causes

Hydraulic issues often stem from:

  • Low or contaminated hydraulic fluid
  • Clogged or worn-out filters
  • Air trapped in the hydraulic system

Quick Fix

  1. Check Hydraulic Fluid: Ensure the hydraulic fluid is at the proper level. Refill if necessary, using only John Deere-recommended hydraulic oil to avoid contamination.
  2. Replace Hydraulic Filters: Dirty filters can restrict fluid flow, so replace them regularly per your owner’s manual.
  3. Bleed the System: Air in the hydraulic system can cause uneven or jerky movement. Follow John Deere’s guidelines to bleed air from the system.
  4. Inspect Seals and Hoses: Worn seals or damaged hoses can cause hydraulic leaks, which lower pressure. Replace any faulty parts promptly.

2. Engine Overheating

Common Symptoms

Engine overheating is another persistent problem with the John Deere 755, particularly in warm weather or during heavy use. Signs include:

  • High temperature gauge readings
  • Reduced power output
  • Smoke or strange smells from the engine

Causes

The most common reasons for overheating include:

  • Low coolant levels
  • Blocked radiator or cooling fins
  • Faulty thermostat or water pump

Quick Fix

  1. Check Coolant Levels: Ensure that the coolant is filled to the recommended level. Low coolant can quickly lead to overheating.
  2. Clean Radiator and Cooling Fins: Dirt and debris can build up in these areas, reducing cooling efficiency. Clean them regularly with a soft brush or compressed air.
  3. Inspect Thermostat and Water Pump: If these parts are damaged, replace them as they are essential for regulating the engine’s temperature.
  4. Examine the Fan Belt: A worn or broken fan belt can affect cooling. Replace any damaged belts to keep the fan running optimally.

3. Transmission Troubles

Common Symptoms

Transmission problems are often noted by users, with complaints of:

  • Grinding noises while shifting
  • Difficulty in engaging or shifting gears
  • Tractor failing to move or lurching forward

Causes

Transmission issues may arise due to:

  • Low or incorrect transmission fluid
  • Mechanical wear on gears or the clutch
  • Problems with the clutch linkage or adjustments

Quick Fix

  1. Check and Top-Up Transmission Fluid: Use only the fluid specified by John Deere. Low or incorrect fluid can cause gear shifting issues.
  2. Inspect the Clutch and Linkage: Worn-out clutch components or misaligned linkage can hinder gear engagement. Adjust or replace these parts as needed.
  3. Routine Maintenance: Ensure regular transmission maintenance to prevent long-term wear and tear, as recommended in the owner’s manual.

4. PTO (Power Take-Off) Malfunction

Common Symptoms

The PTO is critical for running various attachments. Signs of PTO issues include:

  • The PTO failing to engage
  • PTO disengaging unexpectedly during operation
  • Unusual sounds when using PTO-powered attachments

Causes

PTO problems may be due to:

  • Faulty PTO clutch or solenoid
  • Misalignment of the PTO shaft
  • Hydraulic issues that impact the PTO

Quick Fix

  1. Inspect PTO Clutch and Solenoid: A worn-out clutch or defective solenoid can prevent the PTO from engaging correctly. Replace these parts if necessary.
  2. Align the PTO Shaft: Misalignment can prevent smooth PTO operation. Adjust the shaft according to John Deere’s specifications.
  3. Address Hydraulic Issues: Since the PTO relies on the hydraulic system, unresolved hydraulic issues (such as leaks or low fluid) can affect PTO performance.

5. Electrical Issues

Common Symptoms

Electrical issues in the John Deere 755 can be challenging to troubleshoot and are often characterized by:

  • Dim or flickering lights
  • Battery drainage
  • Difficulty starting the engine

Causes

Common causes of electrical problems include:

  • Loose or corroded battery terminals
  • A weak or failing alternator
  • Blown fuses or faulty wiring

Quick Fix

  1. Clean Battery Terminals: Corrosion on battery terminals can prevent proper charging. Use a wire brush to clean the terminals.
  2. Check Alternator and Battery: Use a multimeter to test the battery and alternator. Replace any components that aren’t working correctly.
  3. Inspect Fuses and Wiring: Look for blown fuses and damaged wiring, replacing or repairing as needed. Secure all connections to prevent future issues.

6. Steering Difficulties

Common Symptoms

Steering problems can make operating the 755 difficult and unsafe. Symptoms include:

  • Stiff or unresponsive steering
  • Steering pulling to one side
  • Unusual noises when turning the wheel

Causes

Steering issues are usually caused by:

  • Low power steering fluid
  • Worn or damaged tie rods
  • Problems with the hydraulic system affecting steering

Quick Fix

  1. Check Power Steering Fluid: Low power steering fluid can make steering hard, especially at low speeds. Keep it filled to the correct level.
  2. Inspect Steering Components: Worn tie rods or other steering components should be replaced promptly.
  3. Address Hydraulic Concerns: Since the steering relies on hydraulics, any problems in the hydraulic system, like leaks or trapped air, can impact steering performance.

7. Fuel System Problems

Common Symptoms

A faulty fuel system can cause several issues, such as:

  • Rough idling
  • Engine stalling
  • Poor fuel efficiency

Causes

Fuel system issues can arise from:

  • Clogged fuel filter
  • Air in the fuel lines
  • Worn or dirty fuel injectors

Quick Fix

  1. Replace Fuel Filter: A clogged filter restricts fuel flow, leading to performance issues. Replace it regularly to avoid blockages.
  2. Bleed the Fuel Lines: Air in the fuel lines can disrupt fuel flow. Follow the manual for proper bleeding procedures to remove trapped air.
  3. Clean or Replace Fuel Injectors: Dirty or failing injectors can result in rough idling or stalling. Clean or replace them as needed.

8. Brake Problems

Common Symptoms

Brake issues with the John Deere 755 are both inconvenient and dangerous. Symptoms include:

  • Poor braking response
  • Grinding noises
  • Brakes not holding properly

Causes

Brake problems are often caused by:

  • Worn-out brake pads
  • Low brake fluid
  • Faulty brake lines

Quick Fix

  1. Replace Brake Pads: Worn brake pads reduce stopping power and should be replaced to maintain safety.
  2. Check Brake Fluid: Ensure brake fluid is at the correct level to maintain braking power.
  3. Inspect Brake Lines: Damaged brake lines should be repaired or replaced to ensure reliable braking.

Preventative Maintenance Tips for John Deere 755

While resolving issues promptly is essential, preventative maintenance can help avoid many of these common problems altogether. Here are some tips to keep your John Deere 755 in top condition:

  • Follow the Maintenance Schedule: Regularly change fluids, filters, and inspect parts as outlined in the owner’s manual.
  • Clean Your Tractor Regularly: Dirt and debris can contribute to overheating and mechanical wear. Clean the radiator, air intake, and hydraulic areas frequently.
  • Store Properly: Store your tractor indoors or under cover to protect it from weather-related wear and rust.
  • Inspect Moving Parts: Regularly check belts, hoses, and seals for signs of wear. Replacing these parts before they fail can save on costly repairs and downtime.

Conclusion

While there are some worst John Deere 755 problems that can cause headaches, most of these issues are preventable or easily fixable. Knowing what to look for and understanding the quick fixes can save you time and keep your tractor running efficiently. Remember to follow the maintenance schedule in the owner’s manual, as preventative care is often the best way to avoid serious problems.

For complex issues or persistent problems, don’t hesitate to consult a certified John Deere mechanic. With proper care and timely repairs, your John Deere 755 can continue to be a reliable, high-performing machine on your property.

Leave a Reply

Your email address will not be published. Required fields are marked *